19:53
root Triangle Away v2.40 apk
Requirements: 4.0 and up
Overview: Many Samsung devices store a flash counter that keeps track of
how many times you have flashed *custom* firmwares to your device. On
some devices, a yellow triangle or other sort of visual warning is also
displayed during boot if you are running a *custom* firmware.
TriangleAway was built do disable the triangle (if a visual warning is
present) and reset the custom ROM flash counter to 0. This app requires
root !
You can find out the current status of your flash counter and firmware
state (custom or official) by booting into "download mode" on most
devices. The usual way of getting into "download mode" is by first
turning off your device, then turning it on by pressing and holding
volumedown+home+power. Alternatively, the "adb reboot download" command
also often works.
When you run TriangleAway, if your device and firmware are supported, it
will show you the detected state of the binary (custom or official) and
flash counter value, and the option to "Reset flash counter". Please
confirm that the information shown is correct before resetting the
values.
On a number of devices, TriangleAway can work, but your firmware may not
be supported directly. In that case, the app will tell you it needs to
reboot into a special boot mode, which will be happen if you select
"Reset flash counter". The device will reboot into a special mode which
will allow you to review the current status and reset the binary and
flash counter values (or abort and do nothing).
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR
DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A
WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit
will be able to save you, don't mess with boot(loader) stuff unless you
*really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on the SGS3, the "system modified" status can only be reset on some firmwares.
This app has been used successfully on:
Samsung Galaxy S2 GT-I9100 **
Samsung Galaxy Note GT-N7000 **
Samsung Galaxy Note GT-I9220 **
Samsung Galaxy S3 GT-I9300 **
Samsung Galaxy S3 GT-I9300T **
Samsung Galaxy S3 AT&T
Samsung Galaxy S3 Sprint
Samsung Galaxy S3 T-Mobile
Samsung Galaxy S3 Verizon
Samsung Galaxy S3 Canadia
Samsung Galaxy S3 US Cellular
Samsung Galaxy S3 GT-I9305 LTE **
Samsung Galaxy S3 GT-I9305T LTE **
Samsung Galaxy Note 2 GT-N7100 **
Samsung Galaxy Note 2 GT-N7105 LTE **
Samsung Galaxy Note 2 SPH-L900 Sprint **
Samsung Galaxy Note 10.1" GT-N8000 3G **
Samsung Galaxy Note 10.1" GT-N801x Wi-Fi **
Samsung Galaxy Note 10.1" GT-N8020 LTE **
Samsung Galaxy Tab 2 GT-P310x 7" 3G
Samsung Galaxy Tab 2 GT-P311x 7" Wi-Fi
Samsung Galaxy Tab 2 GT-P510x 10.1" 3G
Samsung Galaxy Tab 2 GT-P511x 10.1" Wi-Fi
** Various related models are supported depending on firmware, but only
the exact model numbers listed are supported regardless of firmware
version.
Whether or not Triangle Away works depends largely on your kernel.
Flashing a different kernel may make it work if it previously didn't.
Variants that are NOT based on Exynos processors but rather on Qualcomm
or Nvidia processors are NOT expected to work. I honestly would NOT try
(until further notice) - examples are the Skyrocket and AT&T Note.
For discussion and technical details, see the XDA-Developers.com thread here:
http://forum.xda-developers.com/showthr ... ?t=1494114
Note that this download is also available from that thread completely
for free. You can go there and download it for free, or buy me a beer
and download it from Market. It is 100% the exact same program.
What's in this version:
v2.40:
- Support for:
--- Samsung Galaxy Note 2 Verizon SCH-I605 (unlocked bootloader only !)
This app has no advertisements
Free root Triangle Away v2.40 apk
Posted in: Android Apps
